9-38 BA ET18, 20, 24 en* 1.5 * et18_20_24t900.fm
9 Technical data
Safety instructions – stability table
The values of the stability tables apply to lifting gear applications.
Crushing hazard due to tipping over of machine.
Causes serious crushing or injury resulting in death.
► Do not exceed the weight specified in the stability table.
► Get informed on the lift capacity of the attachment before using it.
► If an attachment with load hook or joint rod is installed, the weight of the
attachment must be subtracted from the weight specified in the table.
► Use the machine for lifting gear applications only if the mandatory
lifting gear (for example a load hook) and safety equipment (for
example optical and acoustic warning devices (safe load indicator),
stability table, hose burst valve) is installed, functional and enabled.
► Do not tilt the upper carriage (VDS).
► Do not retract the telescopic travel gear (option).
► Observe chapter Safety/Safety instructions regarding lifting gear
applications.
If the specified weight is exceeded, danger of damage to property due to
tipping over of machine.
► Do not exceed the weight specified in the stability table.
The indications are only approximate values. Attachments, uneven
ground and soft or bad ground conditions affect lift capacity. The operator
must take these influences into account.
To Next Page
Loading...
