BA E14 track en* 1.3 * E14t_13_400.fm 4-41
Putting into operation 4
Operating states
Press F1 to toggle between the operating state displays:
• Operating hours
• Daily hours of operation
• Engine speed
• Outside temperature (automatic air-conditioning option)
• Hydraulic oil temperature
•Time
Maintenance meter
Counts the remaining engine operating hours down to the next maintenance
work due.
If less than 10 hours are displayed, the wrench symbol flashes.
Engine speed
This symbol appears when the throttle is operated.
No function
This symbol appears when a control element without function is operated.
high-altitude mode
This display appears when starting the engine above 800 m (2625 ft.) sea level
(only ET65/404F-22T).
– see chapter “ Measures when operating at great heights (ET65/404F-22T)” on
page 7-62
Symbol
To Next Page
Loading...
