Wacker Neuson ET65 - Page 178

5-50 BA E14 track en* 1.3 * E14t_13_510.fm
5 Operation
Changing attachments
Information
Observe manual locking and unlocking.
– see chapter “ Manual HSWS bolt lock” on page 5-46;
– see chapter “ Manual HSWS bolt unlocking” on page 5-47
1. Lower the attachment to about 5 – 10 cm (2 – 4 in) above the ground.
2. Pull lock A down.
3. Press switch B down.
➥ The symbol Hydraulic quickhitch enabled appears and the buzzer
sounds.
4. Press push button C within 10 seconds.
➥ The quickhitch opens.
A
Fig. 218
B
C
Fig. 219
Fig. 220