Wacker Neuson ET65 - Page 179

BA E14 track en* 1.3 * E14t_13_510.fm 5-51
Operation 5
➥ Check pin D must be fully extended.
5. Retract the bucket cylinder.
6. Set down the attachment.
7. Raise the boom.
8. Hook up the quick coupler system E in bolt F of the attachment
receptacle.
9. Extend the bucket cylinder so that pin G of the attachment touches the
quickhitch.
10.Check whether the attachment touches the quickhitch with the second
pin G.
Fig. 221
D
Fig. 222
Fig. 223
G
E
F