BA E14 track en* 1.3 * E14t_13_700.fm 7-37
Maintenance 7
Emptying the water separator (prefilter) (404F-E22TA)
1. Stop and park the vehicle. Stop the engine. See āPreparing lubricationā.
2. Prepare a suitable container for collecting the fuel/water mixture.
3. Open the valve cover.
4. Connect a suitable hose to the drain device D.
5. Open drain valve E.
6. Vent screws F.
7. Drain the fuel/water mixture into a receptacle (1).
8. Tighten vent screws F.
9. Close drain valve E if nothing but fuel is visible in the sight glass (2).
10.Remove the hose.
11.Close and lock the valve cover.
Fig. 289 (symbolic representation)
E
D
Fig. 290 (symbolic representation)
E
2
1
Fig. 291 (symbolic representation)
F
To Next Page
Loading...
