Wacker Neuson ET65 - Page 82

4-14 BA E14 track en* 1.3 * E14t_13_400.fm
4 Putting into operation
Headrest
Lumbar support
The lumbar support can be adjusted to the natural curvature of the spine.
This reduces the load on the spine and ensures a non-fatiguing seating
position.
To adjust the lumbar support, turn button B
Heated seat
Press button C to switch on or off.
Backrest
1. Sit down on the operator seat.
2. Pull lever D and adjust the backrest.
Fig. 97
Function Operation
Height adjustment Pull up or push down
Inclination adjustment Push forward or backward
Fig. 98
B
Fig. 99
C
Fig. 100
D