Wacker Neuson ET65 - Page 83

BA E14 track en* 1.3 * E14t_13_400.fm 4-15
Putting into operation 4
Length of seat surface
1. Sit down on the operator seat.
2. Pull lever E upward and adjust the length of the seat surface.
➥ The seat surface must engage.
Inclination of seat surface
1. Sit down on the operator seat.
2. Pull lever F upward and adjust the inclination of the seat surface.
➥ The seat surface must engage.
Weight adjustment
1. Sit down on the operator seat.
2. Push or pull push button H until the highlighted symbol appears.
NOTICE
Possible damage to the compressor due to long operation of the switch.
► Do not hold the push button more than one minute.
Fig. 101
E
Fig. 102
F
Fig. 103
H