Wacker Neuson RD 24 User Manual

Maintenance
General maintenance instructions
BA RD24_RD28 en us 06
101
Procedure 1 Switch off diesel engine and remove ignition key.
NOTE
Maintain an after-running time of 2 minutes.
000-39
2 Disconnect battery, first negative then positive terminal.
3 Connect negative terminal of the welding appliance in the vicinity of
the weld.
4 Pay attention to the components in the vicinity of the weld.
5 Reconnect all connection plugs after welding.

Wacker Neuson RD 24 Specifications

General

Brand	Wacker Neuson
Model	RD 24
Category	Construction Equipment
Language	English