Assembly Instructions and Auxiliary Devices
Rotating light removable
BA RD24_RD28 en us 06
153
Removing rotating light
1. Unscrew the clamping screw [D] and slide the rotating light [C] off the
contact tube [B].
2. Close the contact tube [B] with the protective cap [A].
3. Stow the rotating light [C] on the holder [E] inside the cab.
6.01.05 Maintenance
NOTE
When working at the machine please always adhere to the
instructions given in your Safety instructions!
000-01
General The instructions itemized in the "Important information about
maintenance work" chapter (see page 98) must always be followed
during all maintenance work.
To Next Page
Loading...
