Operation
Scraper
86
BA RD24_RD28 en us 06
3.09 Scraper
General
The scrapers [A] are designed to remove clogging dirt from the surface
of the roller drums / tyres when working on soft, adhesive ground. With
grounds that are not clingy or with transporting operations the scrapers
can be lifted away from the roller drums / tyres. This prevents premature
wear.
Rinse out dirt embedded between roller drums / tyres with water jet.
Remove strongly adhesive dirt with spatula or similar tool.
3.09.01 Roller drum scraper, top
Attach scraper 1. Switch off diesel engine and remove ignition key.
2. Turn stop lever [536] to I position for a short time.
Moving the scraper away 1. Switch off diesel engine and remove ignition key.
2. Lift the scraper bracket [A] until the catch latches in.
To Next Page
Loading...
Need help?
General
