Description
Technical characteristics of the machine
38
BA RD24_RD28 en us 06
2 DESCRIPTION
NOTE
When working at the machine please always adhere to the
instructions given in your Safety instructions!
000-01
2.00 Technical characteristics of the machine
Transmission Hydrostatic all-wheel drive
■
Infinitely variable
■
Single lever operation
Compaction system Dynamic oscillatory system due to vibration / oscillation
■
Direct hydrostatic drive
Steering Hydrostatic assisted steering via articulated pendulum centre pivot
steering
■
Large steering angle to both sides
■
Pendulum compensation upwards and downwards
Track offset Mechanical track offset
■
Infinitely variable
■
Track offset to the right
Service brake During operation, the machine is braked with the hydrostatic drive.
■
Wear-free brakes
Parking brake Spring-operated brake acting upon each hydromotor of the drive
■
Manually and automatically
EMERGENCY STOP brake Machine is braked with spring-operated brakes and hydrostatic drive.
Water sprinkling Pressure sprinkling
■
Manual actuation
■
Interval automatic
Additive sprinkling Pressure sprinkling
■
Manual actuation
Electrical system Operating voltage 12 V
To Next Page
Loading...
