Maintenance
General maintenance instructions
96
BA RD24_RD28 en us 06
4.00.02 Maintenance overview
NOTE
For engine maintenance see instruction manual for diesel
engine ( )!
Lubricating oil change
intervals
These intervals depend, e.g., on:
■
Lubricating oil quality
■
Fuel sulphur content
■
The mode in which the diesel engine is used
Change lubricating oil after half the interval indicated, e.g., when at least
one of the following conditions is true:
■
Continuous ambient temperature below –10 °C (14 °F) or lubricating
oil temperature below 60 °C (84 °F).
■
Operation using biodiesel fuel
NOTE
Maintenance work must be carried out at least once a year.
This applies, in particular, when the operating hours indicated
in the maintenance intervals are not reached within a year.
Every 10 operating hours
Checking the function of the parking brake see page 102
Inspecting the EMERGENCY STOP func-
tion when engine at standstill
see page 103
Checking hydraulic oil level see page 114
Cleaning sprinkler nozzles see page 126
Checking air pressure in the tyres see page 121
Checking engine oil level
Checking coolant level see page 111
Checking and cleaning air filter / dust valve see page 109
see page 108
Cleaning filter for water sprinkling see page 126
Every 250 operating hours
Checking scrapers / lubricating scrapers see page 118,
Changing engine oil
Exchanging lubrication oil filter of diesel en-
gine
Checking V-belt tension
Lubricating pivoted bearing see page 123
Lubricating steering cylinder bolt see page 124
Checking radiator see page 111
To Next Page
Loading...
Need help?
General
