Assembly Instructions and Auxiliary Devices
Rotating light removable
154
BA RD24_RD28 en us 06
Care
Dirt can impair the function of the rotating light. Therefore keep the
rotating light clean!
■
To clean the rotating light [C], use only a sponge and soap water.
■
Do not clean the rotating light with a water jet or high-pressure
cleaner.
■
Dust or sand can impair the function of the rotating light [C]. Avoid
any dust or sand contamination of the contact tube [B]. Use the
protective cap [A] to blank off the contact tube [B] after removing the
rotating light.
■
Ensure that the electrical contacts of the contact tube [B] and of
the rotating light [D] are kept clean. Remove any dust or sand
immediately. Spray contacts using a contact spray if necessary.
To Next Page
Loading...
