RD 27 Maintenance
wc_tx000815gb.fm 69
5.15 Inspecting the Seat Belt
Prerequisites
Machine shut down
Parking brake engaged
When
Daily, before starting the machine.
l
Procedure
Follow the procedure below to inspect the seat belt.
1. Check the seat belt mounting hardware (a) for wear and damage. Replace
damaged hardware.
2. Check the buckle (b) for wear and damage. Replace the seat belt if the buckle is
damaged.
3. Inspect the seat belt (c) for wear and damage. Replace the seat belt if it is
damaged.
Note: Replace the seat belt every three years even if none of the components
show visible wear or damage.