Maintenance RD 27
70 wc_tx000815gb.fm
5.16 Cleaning the Water Spray Nozzles
Prerequisites
Machine shut down
Clean, nonflammable solvent
When
Every 10 hours of service or daily
l
Procedure
Follow the procedure below to clean the water spray nozzles.
1. Locate the water spray nozzles.
2. Remove the cap (a).
3. Remove the nozzle (b).
4. Remove the rubber washer (c).
5. Remove the screen assembly (d).
6. Clean the nozzle (b) and the screen assembly (d) in a clean, nonflammable
solvent.
7. Reassemble the components.
To Next Page
Loading...