Maintenance RD 27
88 wc_tx000815gb.fm
5.34 Cleaning the Hydraulic Oil Strainer
Prerequisites
Machine shut down
Clean, nonflammable solvent
When
Every 1000 hours of service or yearly
l
Procedure
Follow the procedure below to clean the hydraulic oil strainer.
1. Open the engine compartment.
2. Remove the hydraulic tank filler cap (a).
3. Remove the hydraulic oil strainer (b).
4. Wash the hydraulic oil strainer in nonflammable solvent. Dry it with compressed
air.
5. Re-install the hydraulic oil strainer and the hydraulic tank filler cap.
To Next Page
Loading...