WAGNER Cobra 40-10 Operating Manual

12
Cobra.
OPERATING MANUAL
EDITION 01/2012
PART NUMBER DOC322851
4 DESCRIPTION
4.1 FIELD OF APPLICATION
4.1.2 SUITABLE SPRAY MATERIALS
4.1.1 USING IN ACCORDANCE WITH THE INSTRUCTIONS
The pneumatic piston pump is suitable for process liquid materials according
chapter 4.1.2.
CAUTION
Abrasive materials and pigments!
Greater wear of the parts carrying the material
Do not use any grainy and abrasive materials with large, sharp-edged pigments.
Use suitable combinations of devices (packages, valves etc.).
SIHI_0011_GB
Application Cobra 40-10 Cobra 40-25
Water based lacquers and paints
➚➚
Solvent based lacquers and paints
➚➚
Two-components coating materials
➚➚
Dispersions
➚➚
UV-paints
➚➚
Primers
➙➚
Epoxy and polyurethane paints and lacquers
➚➚
Synthetic materials
➙➙
Wax based under seal
➚➚
Shear sensitive paints
➚➚
Legend
Recommended ➚ limited suitability ➙ less suitable ➘
Application Cobra 40-10 Cobra 40-25
Furniture industry
➚➚
Kitchen manufacturers
➚➚
Joinery
➚➚
Window factories
➙➚
Steel fabrication
➙➙
Construction of vehicles
➚➚
Offshore
➘ ➘
Legend
Recommended ➚ limited suitability ➙ less suitable ➘

WAGNER Cobra 40-10 Specifications

General

Brand	WAGNER
Model	Cobra 40-10
Category	Water Pump
Language	English