WAGNER PEM-C4-Ergo - 4 DESCRIPTION; 4.1 FIELDS OF APPLICATION; 4.2 SCOPE OF DELIVERY

12
PEM-C4-Ergo.
OPERATING MANUAL
VERSION 02/2009
ORDER NUMBER DOC2305054
4 DESCRIPTION
4.1 FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS
The PEM-C4-Ergo spray gun is used for industrial powder coating.
The PEM-C4-Ergo spray gun can be operated with the following control units:
● EPG Sprint with PI-F1 powder injector
● EPG-D1 with PI-F1 powder injector
● EPG 2008/EPG Prima with PI-P1 powder injector
● HVM-DP controller module
Quantity Order No. Description
1 2305069 PEM-C4-Ergo manual gun
The standard equipment includes:
1 2304981 Declaration of conformity
1 2305053 Operating manual German
1 see chapter 1.1 Operating manual in the local language
4.2 SCOPE OF DELIVERY
SIHI_05056_ENG
WARNING
Incorrect use of the spray gun!
Risk of injury and damage to the equipment
 Only connect original Wagner devices to the PEM-C4-Ergo spray
gun.
4.1.1 PROCESSING MATERIALS
Conventional types of powder and metal powder that can be electrostatically charged.
High room temperatures and, in particular, laying hoses in areas exposed to sunlight in
factory buildings must be avoided.