WAGNER PEM-C4-Ergo User Manual

8
PEM-C4-Ergo.
0102
OPERATING MANUAL
VERSION 02/2009 ORDER NUMBER DOC2305054
2.3 USING IN ACCORDANCE WITH THE INSTRUCTIONS
7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE
 5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2
 /PERATETHEUNITONLYASANENTIREUNIT
 $ONOTDEACTIVATESAFETYEQUIPMENT
 5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES
2.2.5 HANDLING POWDER PAINTS
 Take note of the processing regulations laid down by the manufacturer of the powder
paint being used, when preparing or processing the powder.
 Take note of the manufacturer’s advice and the relevant environmental protection
regulations when disposing of powder paints.
 Implement the prescribed safety measures, in particular the wearing of safety glasses
and safety clothing as well as the use of protective hand cream.
 Use dust masks or breathing apparatus.
 To ensure sufficient protection of health and the environment, only operate the device
in a powder booth or at a spray wall with activated ventilation (exhaust air).
2.4.1 USING IN ACCORDANCE WITH THE INSTRUCTIONS
2.4.2 EXPLOSION PROTECTION IDENTIFICATION
2.4 FOR USE IN POTENTIALLY EXPLOSIVE AREAS
II 2 D EEx 2mJ 85°C
CE: Communautés Européennes
Ex: Symbol for explosion protection
II: Unit class II
2: Category 2 gun
D: Ex-atmosphere dust
2mJ: max. fi ring power 2 mJ
85°C: max. surface temperature
This type A-P powder electrostatic gun is suited to processing industrial powder paints for
coating electro-conductive objects and can be used in potentially explosive atmospheres.
(See explosion protection identifi cation).

WAGNER PEM-C4-Ergo Specifications

General

Brand	WAGNER
Model	PEM-C4-Ergo
Category	Tools
Language	English