20
PEM-C4-Ergo.
P_01120
1
2
3
6
7
5
4
OPERATING MANUAL
VERSION 02/2009 ORDER NUMBER DOC2305054
5.3.1 GROUNDING OF THE POWDER COATING SYSTEM
1 Only use mains cables with grounding wire!
2 Connect grounding cable with booth and system ground!
3 Connect grounding cable to an uncoated metal part of the booth!
4 Remove all paint from hooks and other hanger parts!
5 Do not wear non-conducting gloves!
6 Wear electrostatically conductive shoes!
7 The fl oor must be electrostatically conductive!
To Next Page
Loading...