49
PEM-C4-Ergo.
OPERATING MANUAL
VERSION 02/2009 ORDER NUMBER DOC2305054
!LWAYSSUPPLYTHEFOLLOWINGINFORMATIONTOENSUREDELIVERYOFTHERIGHTSPAREPART
0ART.UMBERDESCRIPTIONANDQUANTITY
4HEQUANTITYNEEDNOTBE THESAMEASTHENUMBERGIVENINTHEu1UANTITYhCOLUMN4HIS
NUMBERMERELYINDICATESHOWMANYOFTHERESPECTIVEPARTSAREUSEDINEACHSUBASSEMBLY
4HEFOLLOWINGINFORMATIONISALSOREQUIREDTOENSURESMOOTHPROCESSINGOFYOURORDER
!DDRESSFORTHEINVOICE
!DDRESSFORDELIVERY
.AMEOFTHEPERSONTOBECONTACTEDINTHEEVENTOFANYQUERIES
4YPEOFDELIVERYREQUIREDAIRFREIGHTORMAILSEAROUTEOROVERLANDROUTEETC
-ARKSINSPAREPARTSLISTS
.OTETOCOLUMNu+hINTHEFOLLOWINGSPAREPARTSLISTS
U 7EARINGPARTS
.OTE.OLIABILITYISASSUMEDFORWEARINGPARTS
L .OTPARTOFSTANDARDEQUIPMENTAVAILABLEHOWEVERASADDITIONALEXTRA
10 SPARE PARTS
10.1 HOW TO ORDER SPARE PARTS?
WARNING
Incorrect maintenance/ repair!
Risk of injury and damage to the equipment
➞ Repairs and part replacement may only be carried out by
specially trained staff or a WAGNER service center.
➞ Before all work on the unit and in the event of work
interruptions:
- Switch off the energy/compressed air supply.
- Ensure that all system components are grounded.
- Secure the control unit against being switched back on
without authorisation.
➞ Observe the operating and service instructions when carrying
out all work.