71
C23i Maintenance Instructions
Replacing and Repairing
REPLACING/REPAIRING
DANGER
To prevent accidental starting of the engine
when replacing parts or repairing the ma-
chine, remove the key from the ignition
switch and disconnect the spark plug
wires.
IMPORTANT: ALWAYS use genuine factory
replacement parts. Substitute parts CAN result in
product malfunction and possible injury to the
operator and/or others.
Drive Belts
There are three (3) individual belts on the
machine:
● Engine Belt
● Ground Drive Belt
● PTO/Blower Drive Belt
The belts may be removed and replaced using the
procedures described on the following pages.
Belt Locations
Engine Belt
Ground Drive Belt
PTO/Blower
Drive Belt
To Next Page
Loading...
Need help?
General
