Wallenstein FX Series - Delivery Inspection Report

Introduction
FX85, FX110, FX140
Skidding Winch
4
1.1 Delivery Inspection Report
Wallenstein FX Series Skidding Winch
To register your product and start the warranty, go to WallensteinEquipment.com.
This form must be completed by the dealer at the time of delivery, and then signed by the dealer and customer.
I received the product manuals and was thoroughly instructed
about the care, adjustments, safe operation, and applicable
warranty policy.
Customer
Address
City, State/Province, ZIP/Postal Code
( )
Phone Number
Contact Name
Model
Serial Number
Delivery date
I thoroughly instructed the customer about the equipment care,
adjustments, safe operation, and applicable warranty policy, and
reviewed the manuals with them.
Dealer
Address
City, State/Province, ZIP/Postal Code
( )
Phone Number
Dealer Inspection Checklist
Drive chain tension is correct.
PTO shaft extends and retracts, and the guard turns.
Clutch is adjusted and functions correctly.
All fasteners are torqued to the correct specification.
All grease points are lubricated.
Purchased accessories are included, if applicable.
Operator's manual is in the storage tube.
Winch rope or steel cable is in working condition and is
wound correctly.
Clutch and brake ropes move freely.
FX85R/FX85RS, FX110R/FX110RS, FX140R/FX140RS
Remote control functions correctly.
Clutch hydraulic cylinder functions correctly.
Hydraulic connections are in working condition.
Electrical wires are connected and in working condition.
Safety Checks
All safety labels are applied and legible.
All guards, shields, and covers are installed and tight.
A retainer is installed through each hitch point.
Operating and safety instructions were reviewed.