WANHAO DUPLICATOR 9 - Technical Specifications

Technical Specications
Primary Attributes
of the Technology
PLA Printer, Entry Level Printer.
Fully Assembled. Developed from Prusa i3.
Software CURA, Repetier Host, Simplify 3D
Extruder System MK10 Extruder with Full Metal Hot End
Material Support PLA, PETG, PVA, Nylon, And Most Exotics
Any Material Melting <=250 C
Max Printable Area 300*300*400mm/ 400*400*400mm
/ 500*500*500mm
Filament Diameter 1.75mm
Max Printing Speed 70mm/s
Case Material Aluminum Case
With Insulated Cover? Insulated Tent Optional.
Extruder Quantity 1
Motor Accuracy X 0.012mm
Y 0.012mm
Z 0.004mm
Net Weight(kg) 20kg
Gross Weight(kg) 22kg
Material Cost USD12-34
Bed Leveling Auto leveling and manual leveling
Packing size(cm) 60*50*35cm
Plateform Holder Steel Frame Holder
Rail Locking System Steel Bolt Locking Frame
Layer Thickness 100 micron- 400 micron
Platform Aluminium Platform w/Heating
Resume Printing?
Can resume printing after power failure
LCD Display English/Chinese/ Can be customized for
any language
Power Supply Unit Inside 110 AND 250V(optional), 50/60Hz, 4.0A
(input), and takes standard IEC cable
Typical Application •A perfect printer for educators who intend to
use the printers in technical educatioin.
•Great printer for DIY hobbist.
Technical Specications
9
AFTER SALES SUPPORT
86-571-23290996
support@wanhao3dprinter.com
Model : Duplicator 9
o