WANHAO DUPLICATOR I3 MINI - Routine Component Checks and Storage; 5.1.3 Routine Component Check; 5.1.4 Storing

28
SERVICING
5.1.3 Routine Component Check
Motor Connectors
Loose motor connections could cause a 3D print to fail.It's a good habit to routinely check for any
damage to the connectors or the black cables.
Axis Lubrication
Regular lubrication of the X and Y Axis rods is important for the longevity and smooth running of
your printer.The rods can be lubricated with machine oil or synthetic grease.We recommend using
bearing grease and to apply liberally to both the X Axis and Y Axis rods.
Nuts and Bolts
Loose nuts and bolts could affert the geometry of the Duplicator I3 MiNi . Check that all nuts
and bolts remain rmly tightened.If required,retightern using the hex wrench.
Always store your Duplicator I3 MiNi in a cool,dry location that is free from dust.
5.1.4 Storing