WANHAO DUPLICATOR I3 MINI - Technical Specifications

Technical Specications
Printing
Print Technology: Fused Filament Fabrication (FFF)
Build Volume: 120 x 135 x 100 mm(Width x Depth x Height)
Layer Resolution: 0.1 – 0.4mm
Positioning Accuracy: X 0.012mm
Y 0.012mm
Z 0.004mm
Extruder Quantity: Single Extruder
Nozzle Diameter: 0.4mm
Print Speed: 10mm/s - 70mm/s
Travel Speed: 10mm/s - 70mm/s
Supported Print Materials: WANHAO Branded PLA, PLA Wood
Temperature
Ambient Operating Temperature: 15°C – 30°C
Operational Extruder Temperature: 170°C - 260°C
Software
Slicer Software: Cura Wanhao Edition
Cura Input Formats: .STL, .OBJ, .DAE, .AMF
Cura Output Format: .GCODE
Connectivity: Micro SD Card, USB port (Firmware updating only)
Electrical
Input Rating: 85~264V AC, 47~63HZ,
0.95A/115VAC 0.56A/230VAC
Physical Dimensions
Printer Frame Dimensions: 325 x 240 x 380 mm(Width x Depth x Height)
Weight: 7KG
9