Network > Onvif setting
Onvif is a global standard for the interface of IP-based security products. The ONVIF
protocol ensures interoperability between products regardless of manufacturer, allowing
you to integrate your IP camera as a generic ONVIF camera into existing security
systems. Enter Onvif Setting. The user can start up and calibrate Onvif functions. The
default setting for Onvif calibration is on.
Note:NVR devices of some manufacturers do not support camera access with Onvif
calibration. Our device supports Onvif versions 2.5 and below.
Network >FTP Settings
FTP Server Address: This field
allows the user to designate an IP
address or DDNS address for the
FTP server.
Server Port: This field allows the
user to designate the port number
for the FTP server.
User Name: Input FTP user name.
Password: Input FTP password.
Path: Specify a folder for
storing video and pictures, for
example: /K2
Note: If you want to save the alarm picture and video to FTP, you must build an FTP
sever, then create an FTP account with a password (not an anonymous account) on your
FTP server and FTP account must have create and delete file rights.
To Next Page
Loading...
