Once the alarm is set, users will receive a notification on the smartphone (only Android) if
the app is running on the background and can choose to get:
Snapshot to Email: When an alarm is detected, the camera will send 2 pictures to the
email box.
Click Mail Setting to setup the email. Check your email provider for SMTP Server and
Port. Snapshot to FTP server: When an alarm is detected, the camera will send 2
pictures to your FTP server. Click on FTP Setting to setup FTP.
Recording to FTP server: When an alarm is detected, the camera will send a 15 sec
video to your FTP server.(function disabled for K2)
Snapshot to SD/TF: When an alarm is detected, the camera will send 2 pictures to the
SD card.
Recording to SD/TF: When an alarm is detected, the camera will send a 30 sec video
to the SD card (function disabled for K2).
Trigger IO Output: User can add a siren or another alarm device to the camera
(wired). When an alarm is detected, the external IO output will work. Users can choose
alarm duration from 5 to 30 sec (function disabled in this model).
Trigger Preset: When an alarm is detected, the camera will focus on one of the 8
Preset spots (see above) (function disabled in this model).
Trigger Speaker: When an alarm is detected the speaker will act as a siren for the
chosen length (5-30sec).
Trigger indipendently: The alarm will be triggered for any kind of active alarm
event (Motion/ Voice/IO).
Alarm > Armed Time
By default alarm is armed 24h/7
days. Users can choose specific
days and time ranges.
To Next Page
Loading...
