Wansview Q3 - Page 16

www.wansview.com
16
Alarm Deployment
In the Alarm Deployment screen users can set:
IO Detecon: Camera allows user to add an external source of alert (moon sensor or push
buon). We recommend the Instar IN-500 PIR Sensor as external moon sensor.
Sensor Type: The external sensor can be always open or always close. Please check your alarm
device seng in the user guide.
Moon Detecon Sensivity: users can choose Low/ Middle/ High sensivity according to needs.
In the Web Interface, users can set sensivity in a range 1-100.
Voice Detecon Sensivity: user can choose Low/ Middle/ High according to needs. In the Web
Interface, users can set sensivity in a range 1-10.
Temperature detecon: funcon disabled in this model
Humidity detecon: funcon disabled in this model
Alarm trigger type
Trigger alone: The alarm will be triggered for any kind of acve alarm event (Moon/ Voice/IO).
Trigger link: The alarm will be triggered for mulple detecon at the same me (Moon/
Voice/IO).
Alarm Acon
Save Picture to Email: When an alarm is detected, the camera will send three pictures to the email
box. Users can set up to 2 recipients.
Click Mail Seng to setup the email. Check your email provider for SMTP Server and Port.
Save Picture to FTP: When an alarm is detected, the camera will send 2 pictures to your FTP
server. Click on FTP Seng to setup FTP.
Save Record to FTP: When an alarm is detected, the camera will send a 15 sec video to your FTP
server.
Save Picture to SD/TF: When an alarm is detected, the camera will send 2 pictures to the SD card.
Save Record to SD/TF: When an alarm is detected, the camera will send a 30 sec video to the SD
card.
Trigger IO Output: User can add a siren or another alarm device to the camera. When an alarm is
detected, the external IO output will work. Users can choose alarm duraon from 5 to 30 sec.
Preset Linkage: When an alarm is detected, the camera will focus on one of the 8 Preset spots (see
above).
Speaker Linkage: When an alarm is detected the speaker will act as a siren for the chosen length
(5-30sec).
Time Deployment
Users can set me and day of the week where the alarm funcon is acve.
Pink means the me is armed, while blank means the me is disarmed.