Wansview Q3 - SD;TF Record and Playback; Alarm Setting

www.wansview.com
15
2.4 SD/TF Record and Playback
2.5 Alarm Seng
SD Card Recording
Playback recorded video in the SD card
If a SD Card is installed in the
camera, from the Advanced
Sengs users can choose to
record or not on the SD card by
switching the SD/TF Recording
buon.
To view recordings, access to
SD/TF Record and Playback.
Choose a day in the calendar, then
select Schedule or Alarm click
Done to see the list of recorded
video on the SD card.
The IP Camera begins recording when it detects movement/audio and stops recording in 30 sec.
In this secon, users can customize the moon detecon feature. This feature can be set on the
app or in the web interface. Moon is detected by changes in the pixels of the images.
Please note that moon detecon doesn’t work through windows. In this case we recommend to
connect an external moon sensor out of the window using the IO alarm port.
Access to
“Alarm
Seng” to set
Alarm
Deployment,
Alarm Acon
and Time
Deployment.