www.wansview.com
20
2.6.8 AC Frequency
2.6.9 Maintenance
Reboot /Restore
2.6.10 About Camera
User can adjust the power frequency,
Power frequencies include: 50HZ(220V
voltage selects 50HZ), 60HZ(110V
voltage selects 60HZ), 60HZ used in
Japan, Canada etc.
Reboot camera if Wi-Fi connecon is
not working or if the camera/app is
frozen. Please note that the setup
procedure needs to be repeated again
aer reboots. The camera IP address
will also change.
Here you can check the camera
informaon, such as Firemware, P2P
version, IP address and MAC address
Remember to exit the app aer
use, to prevent baery drainage
and data consumpon
To Next Page
Loading...
