Wansview Q3 - Alarm - Motion and Audio Detection

www.wansview.com
31
Security > IP Filtering
This screen allows for the
filtering of IP addresses, either
blocking them or granng them
access to the camera.
This feature helps make the
camera more secure by liming
remote access only to approved
users. Below is a Screen shot of
the IP Filtering screen.
Security > Mask Area (not available for MAC users)
Users exclude up to 4 areas
from monitoring.
Click Start Seng and check the
windows.
3.4.5 Alarm - Moon and Audio Detecon
Alarm > IO Detector (disabled in this model)
Camera allows user to add an
external source of alert
(moon sensor or push
buon). We recommend the
Instar IN-500 PIR Sensor as
external moon sensor.
The external sensor can be
always open or always close.
Please check your alarm device
seng in the user guide.