Wansview Q3 - Network

www.wansview.com
25
System > Maintenance
In System Maintenance users can
reboot/restore to default / backup
/upgrade camera.
System > About
In System About users can check the
latest camera’s firmware which can be
downloaded at www.wansview.com.
3.4.2 Network
These funcons are meant to be managed by technical specialist except for FTP Server Sengs and
SMTP Sengs. Contact our friendly customer service for specific technical needs.
Network > IP seng
You can set the camera IP
address by your router(DHCP) or
you can manually set a fixed
address.
-IP address (for example
192.168.x.x)
-Subnet mask(for example
255.255.255.0)
-Gateway(IP address of your
router; for example 192.168.x.1)
-Primary DNS(IP address of your
router; for example192.168.x.1)
-Secondary DNS(IP address of
your router; for
example192.168.x.1)