Wansview Q3 - Page 26

www.wansview.com
26
Network > Port seng
At "Port Seng", the user can
change web access port (hp port).
Port seng range: 80-65535. Pay
aenon not to conflict with other
port values.
Network > Wi-Fi seng
At "Wi-Fi Set Up", click "Search"
and start up "Wi-Fi". Choose the
wireless router to be connected.
Input the password to connect to
the router. Click Save to complete
Wi-Fi Configuraon. Aer
compleng the configuraon, click
Test to confirm whether it is
connected to the wireless router.
Network > UPNP seng
If the user wants to view the
camera through the internet, the
router and camera UPNP port
forwarding funcon need to be
turned on.
Before auto port mapping, please
ensure your router supports UPNP
and has been enabled.