Wansview Q3 - Linkage Alarm

www.wansview.com
44
5.3.3.3 Linkage Alarm
If user set up alarm, the camera will
execute a variety of alarm acons at
linkage: snap to email, snapshot and
video to FTP, snap and video to SD
card.
And if you connect external I/O alarm
device, it can trigger alarm too.
Tips: The mothod of”Trigger Alone”
and “Combinaon Trigger”, if the user
starts up an audio detecon and
moon detecon, the “Combinaon
Trigger” will be started up. Only when
any abnormality is detected
simultaneously by the audio detecon
and moon detecon will the alarm
acon be triggered.
1)Email seng
Email address: your email address.
Email Password: your email password, if
you are using Gmail, please generate an
app password, and using the app
password. Download a document from
our website on how to set up app
password.
Smtp Server: such as smtp.gmail.com
etc.
Smtp port: 465 or 587
Security Type: SSL
Sender:your email address, the same
with sender
2)FTP Seng
FTP Server Address: This field allows
the user to designate an IP address or
DDNS address for the FTP server.
Server Port: This field allows the user
to designate the port number for the
FTP server.
User Name: Input FTP user name.
Password: Input FTP password.
Path: Specify a folder for storing video
and pictures, for example: ./Q3 alarm
Note: If you want to save the alarm
picture and video to FTP, you must
build an FTP sever, then create an FTP
account with a password (not an
anonymous account) on your FTP server and FTP account must have create and delete file rights.
Email address:
Email Sender setting
Receiver Setting
Email Password:
SMTP Server:
SMTP Port:
Security Type:
Sender:
E-mail subject:
E-mail content:
Receiver 1:
Receiver 2:
Test Refresh Save
service2@wansview.com
email, it should be the same
with "Email address"
smtp.qiye.163.com
25
NONE
alarm
Q3 alarm
service@wansview.com
service2@wansview.com
service2@wansview.com
any information
any email
E-mail subject and contont can be any informaon
Receiver: any email address
Aer all the informaon are filled in, click “Save” and “Test” the email to see if the email seng is