Wansview Q3 - Page 33

www.wansview.com
33
Once the alarm is set, users will receive a noficaon on the smartphone (only Android) if the app
is running on the background and can choose to get:
Snapshot to Email: When an alarm is detected, the camera will send three pictures to the email
box. Users can set up to 2 recipients.
Click Mail Seng to setup the email. Check your email provider for SMTP Server and Port.
Snapshot to FTP server: When an alarm is detected, the camera will send 2 pictures to your FTP
server. Click on FTP Seng to setup FTP.
Recording to FTP server: When an alarm is detected, the camera will send a 15 sec video to your
FTP server.
Snapshot to SD/TF: When an alarm is detected, the camera will send 2 pictures to the SD card.
Recording to SD/TF: When an alarm is detected, the camera will send a 30 sec video to the SD
card.
Trigger IO Output: User can add a siren or another alarm device to the camera (wired). When an
alarm is detected, the external IO output will work. Users can choose alarm duraon from 5 to 30
sec.
Trigger Preset: When an alarm is detected, the camera will focus on one of the 8 Preset spots (see
above).
Trigger Speaker: When an alarm is detected the speaker will act as a siren for the chosen length
(5-30sec).
Trigger indipendently: The alarm will be triggered for any kind of acve alarm event (Moon/
Voice/IO).
Trigger jointly: The alarm will be triggered for mulple detecon at the same me (Moon/
Voice/IO).
Alarm > Armed Time
By default alarm is armed 24h/7
days. Users can choose specific days
and me ranges.