Waters ACQUITY Arc System - Maintenance Procedure and Frequency

serial numbers of the modules that comprise the system when you report a problem
to Waters Technical Support.
To locate system serial numbers:
1. In the console, select a module from the system tree.
2. Click Configure > View module information.
Result: The Module Information dialog box displays this information:
• Serial number
• Firmware version
• Firmware checksum
• Component software version
Alternatives:
• In the main window, move the pointer over the icon of the system module
for which you want to view the information.
• Obtain the serial number from the printed labels affixed to the rear panels
of the system modules or inside their front doors.
4.2
Maintenance procedure and frequency
The following tables list periodic maintenance schedules that ensure optimal
performance of the system modules and therefore performance of the system. The
maintenance frequencies shown apply to modules that receive moderate use. When
using the system throughout the day (and on nights and weekends), or when using
aggressive solvents such as buffers, perform these maintenance tasks more
frequently.
See also: For complete procedures, refer to the component’s overview and
maintenance guide on the documentation CD.
Maintenance procedure Frequency
Tightening of fittings As needed. For instructions about tightening fittings
see the Installation recommendations for fittings
section as well as the component's overview and
maintenance guide on the documentation CD.
Replace tubing As needed. For instructions about replacing tubing see
the component's overview and maintenance guide on
the documentation CD.
June 12, 2015, 715004747 Rev. A
Page 47