iv
Safety considerations
Some reagents and samples used with Waters instruments and devices can
pose chemical, biological, or radiological hazards (or any combination thereof).
You must know the potentially hazardous effects of all substances you work
with. Always follow Good Laboratory Practice, and consult your organization’s
safety representative for guidance.
Considerations specific to the ACQUITY UPLC I-Class
instruments
See also: For safety considerations regarding specific system modules,
consult the appropriate information on the user documentation CD.
High voltage hazard
Safety advisories
Consult Appendix A for a comprehensive list of warning and caution
advisories.
Operating the ACQUITY UPLC I-Class system
When operating the ACQUITY UPLC I-Class system, follow standard
quality-control (QC) procedures and the guidelines presented in this section.
Warning: To avoid electric shock, do not remove protective panels from
the ACQUITY UPLC
®
I-Class system modules. The components within
are not user-serviceable.
To Next Page
Loading...
