v
Applicable symbols
Audience and purpose
This guide is intended for personnel who install, operate, and maintain
ACQUITY UPLC I-Class system modules. It gives an overview of the system’s
technology and operation.
Intended use of the ACQUITY UPLC I-Class system
Waters designed the ACQUITY UPLC I-Class system to perform
chromatographic separations. The system is for research use only and is not
intended for use in diagnostic applications.
Calibrating
To calibrate LC systems, follow acceptable calibration methods using at least
five standards to generate a standard curve. The concentration range for
standards should include the entire range of QC samples, typical specimens,
and atypical specimens.
Symbol Definition
Manufacturer
Authorized representative of the European
Community
Confirms that a manufactured product complies
with all applicable European Community
directives
Australia C-Tick EMC compliant
Confirms that a manufactured product complies
with all applicable United States and Canadian
safety requirements
Consult instructions for use
To Next Page
Loading...
