Need help?Do you have a question about the Waters ACQUITY UPLC I-Class IVD and is the answer not in the manual?
General safety advice for handling chemicals and operating instruments.
Details the functionality and specifications of the Binary Solvent Manager.
Explains the operation of the Sample Manager with flow-through-needle mechanism.
Provides advice for ensuring optimum performance from the ACQUITY UPLC I-Class IVD system.
Explains carryover in chromatography and methods to minimize it.
Explains how leaks can occur and how to prevent them.
Outlines steps for powering on the system and its modules.
Procedures for starting up the system after idle periods.
Details the binary solvent manager control panel and its parameters.
Displays sample compartment and column heater temperatures and set points.
Outlines periodic maintenance schedules for optimal instrument performance.
Lists maintenance tasks for the Column Manager and their frequency.
Continues listing maintenance procedures for the Column Manager.
Details maintenance procedures for the SM-FTN.
Lists maintenance tasks for the Binary Solvent Manager.
Continues listing maintenance procedures for the BSM.
Explains how to use Connections INSIGHT for service and support.
Safety precautions for performing maintenance on the mass spectrometer.
Explains hazard symbols and their alerts for risks of death or injury.
Explains various hazard symbols and their associated risks for safe operation.
Warns about the risk of nonmetallic tubing bursting under pressure.
Safety warning regarding flammable solvents and nitrogen flow.
Warning about electric shock from mass spectrometer panels.
Safety warning for instruments handling biohazardous materials.
Warning for instruments processing corrosive, toxic, or hazardous substances.
Precautions for working with pressurized polymer tubing.
Outlines operating and shipping environmental conditions for the system.
Details electrical ratings, voltage, and power draw of the system.
Lists I/O specifications for the Binary Solvent Manager.
Lists I/O specifications for the Sample Manager - FTN.
Details the pinouts for I/O signal connectors on the BSM.
Details the pinouts for I/O signal connectors on the Sample Manager.
Instructions for connecting system modules to the power source.
General advice for handling and using solvents with the system.
Guidance on using high-quality, filtered solvents for optimal results.
Lists solvents recommended for reversed-phase chromatography.
To Next Page
General