Moving the assembled FlexCart
July 7, 2014, 715003736IVD Rev. C 95
To release the FlexCart floor lock brake:
Release the cart by depressing the brake release bar located at the front of the
cart.
Moving the assembled FlexCart
Once it is assembled, you can move the cart to other areas of a lab to minimize
tubing runs between the ACQUITY UPLC instruments and a mass
spectrometer. Use the lip on top of the cart to pull it.
Caution: To avoid spills of damaging solvent, remove all solvent
reservoirs from the solvent tray before moving the cart.
Caution: To avoid striking low doorways, lower the cart fully before
moving it.
Caution: To avoid toppling the instruments stacked on the cart, do not
move the cart by pushing on them.
To Next Page
Loading...
