Configuring MassLynx software
July 7, 2014, 715003736IVD Rev. C 33
3. Click OK.
Result: The system primes the selected solvents, primes the sample
manager with one weak-wash prime (using the wash and sample
syringes), and ignites the lamp in the detector.
Configuring MassLynx software
Configure the MassLynx system software, for use with ACQUITY:
•Start MassLynx and log in.
•Select system modules, and name the system (see MassLynx Help for
details).
•Open the ACQUITY Console and control panels.
ACQUITY control panels
You can monitor control panels for the binary solvent manager, sample
manager, and detector from MassLynx software. The control panels appear on
the Additional Status tab of the Inlet Editor window.
Binary solvent manager control panel
The binary solvent manager control panel displays flow status, system
pressure, total flow rate, and solvent composition parameters.
Rule: You can edit these parameters when the system is idle by clicking the
underlined value. You cannot edit binary solvent manager parameters while
the system is running samples.
Binary solvent manager control panel:
Status
Flow LED
System pressure
Flow rate
Solvent composition
Stop flow
To Next Page
Loading...