Starting the ACQUITY UPLC Console 3-13
Starting the ACQUITY UPLC Console
The ACQUITY UPLC Console software provides a way to configure settings,
monitor performance, run diagnostic tests, and maintain the system and its
modules. It replaces the keypads and small-screen displays traditionally
found on the fronts of system modules. The ACQUITY UPLC Console
functions independently of data applications and does not recognize or control
them.
From the ACQUITY UPLC Console's interface, you can quickly navigate to
visual representations of each module and its components. You can also
navigate to interactive diagrams, which show interconnections and provide
diagnostic tools for troubleshooting problems.
To start the ACQUITY UPLC Console from Empower software:
In the Run samples window, click Display console in the Sample Manager
control panel.
To start the ACQUITY UPLC Console from MassLynx software:
1. In the MassLynx window, click Inlet Method.
2. In the Inlet Method window, click the ACQUITY Additional Status tab.
3. Click Display console .
Additional functions in the column manager control panel:
Control panel function Description
Reset CM Resets the column manager, when
present, after an error condition
Help Displays the ACQUITY UPLC
Console online Help
To Next Page
Loading...
