Ident. No.: 1313525D_EN Status: 25.09.2012 © Webasto Thermo & Comfort SE
25
Audi A4 / A5
Webasto Thermo & Comfort SE
Postfach 1410
82199 Gilching
Germany
Internet: www.webasto.com
Technical Extranet:
http://dealers.webasto.com
Final Work
WARNING!
Reassemble the disassembled components in reverse order.
Check all hoses, clamps and all electrical connections for firm seating.
Secure all loose lines using cable ties.
Only use manufacturer-approved coolant.
Spray the heater components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect the battery.
- Fill and bleed the coolant circuit according to the vehicle manufacturer’s specifications.
- Set the digital timer.
- Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
- Check the proper function of the parking heater, see the operating instructions/installation
instructions.
- Attach the "Switch off parking heater before refueling" sticker to the left-hand B-pillar.
Adaptation of Climatronic J255 Control Unit
in "Guided functions" mode with VAS 5051/52
Function:
- 08 Heating / Air Conditioning
-
10 Adaptation
Code channel
17 - from "0" to "1"
Save
Mount underride protection 1. Insert red (rt)
rubber isolator
2 in existing hole of underride
protection
1. Align exhaust end section 3
flush on red rubber isolator
2.
Inserting
rubber iso-
lator
To Next Page
Loading...
Need help?
General
