EasyManua.ls Logo

Weber Rescue Systems E-FORCE3 - Particular Hazards

Weber Rescue Systems E-FORCE3
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY | 13

The dangers resulng from the risk assessment are presented in the following secon.
To minimize potenal health hazards and prevent dangerous situaons, the safety instrucons
listed below and the warning instrucons in the following chapters of these Operang
Instrucons must be observed.
Electrical current
DANGER!

There is an immediate danger of death if live parts are touched. Damage
to insulaon or individual components can be life-threatening.
Therefore:
» If there is damage to the insulaon, disconnect the power supply
immediately and arrange for repairs.
» Only allow electricians to carry out work on the electrical system.
» When any work is being carried out on the electrical system, it must
be disconnected from the mains supply and checked to ensure that
it is not live.
» Before carrying out maintenance, cleaning or repair work, the power
supply must be switched o and secured to prevent it being switched
on again.
» Do not bypass or shut down any fuses. Use fuses with the correct
amperage when replacing.
» Keep live parts away from moisture. This can cause a short circuit.
WARNING!
The use of E-FORCE appliances in potenally explosive atmospheres
is prohibited.

Table of Contents

Related product manuals