Weber Rescue Systems E-FORCE3 - Table of Contents

Table of contents
1. General 4
1.1 Informaon on the operang instrucons 4
1.2 Explanaon of symbols 5
1.3 Limitaon of liability 6
1.5 Warranty provisions 7
2 Safety 8
2.1 Intended use 8
2.2 Operator responsibility 10
2.3 Operang personnel 11
2.4 Personal protecve equipment 12
2.5 Parcular hazards 13
2.6 Conduct in dangerous situaons and accidents 15
2.7 Signage 16
 
3.1 Combi tools 17
3.2 Cuers 18
3.3 Spreaders 21
3.4 Rescue rams 22
3.5 Operang condions 22
3.6 Type plate 22
 
4.1 Overview of E-FORCE appliances 23
4.2 Hydraulic supply 27
4.3 Electrical supply, using a combi tool as an example 28
4.4 Operang E-FORCE appliances 29
4.6 Accessories 30
4.7 Replacing blade inserts (PLUS) 33
4.8 Replacing the spreader ps 35
 
5.1 Safety instrucons 36
5.2 Cung (cuers, combi tools) 36
5.3 Pressing (rescue rams) 37
5.4 Spreading (spreaders, combi tools) 38
5.6 Squeezing (spreaders, combi tools) 40
5.7 Liing (spreaders, combi tools, rescue rams) 41
5.8 Peeling (spreaders, combi tools, rescue rams) 41