Weber Rescue Systems E-FORCE3 - Lifting (Spreaders, Combi Tools, Rescue Rams); Peeling (Spreaders, Combi Tools, Rescue Rams)

APPLICATIONS | 41

Spreaders, combi tools and rescue rams can be used for liing vehicles or other movable loads
on one side. Care must be taken to secure the load against slipping away and to posion the
spreader ps far enough apart under the load to prevent slipping.
The load being lied must be constantly monitored (pping, rolling away or changing posion).
Furthermore, the lied load must be immediately propped up and supported in a suitable way.
Avoid remaining beneath loads!
Under special condions, rescue rams can also be used to li loads. When doing so, make espe-
cially sure that the ram is placed as centrally as possible and at a right angle beneath the load.
NOTE!
Be
fore a rescue ram is used, the aachment point must be supported so
that force develops in the desired
direcon.
NOTE!
Complete liing of loads is not permied with rescue appliances.

To create entry openings aer bus and train accidents, in silos, etc., both the spreader ps and
the peeling tool can be used.