ATTENTION!
Prior to all maintenance work, the equipment must be cleaned of any dirt
so that it does not get into the hydraulic system. Cleaning can be carried out
using a convenonal cleaner.
• The appliance must be dried aer being operated in damp condions
• Browned parts (bolts, blades and clips) must be greased
NOTE!
If problems occur when maintaining the appliances, our customer service
department is available to assist (see Chapter 1.6).
9.4 Maintenance schedule
For an exact maintenance schedule with inspecon intervals, regulaons and reports,
see DGUV guideline 305-002, point 18 (hydraulically-actuated rescue appliances).
To Next Page
Loading...