Weber Rescue Systems E-FORCE3 - Maintenance; Safety Instructions; Upkeep and Maintenance

MAINTENANCE | 51
9 Maintenance

WARNING!

Improper operaon of the appliance can cause severe injury or property
damage.
Therefore, it is absolutely necessary to:
» Have all maintenance work carried out by trained specialists.
» Ensure good housekeeping and cleanliness at the workplace! Loose
components and tools le lying around constute a potenal hazard.
» Wear protecve gloves during all work!
9.2 Upkeep and maintenance
To be ready for operaon at any me, the following measures are absolutely imperave:
• Aer every load, but at least once a year, visually check the appliance and its
accessory parts.
Pay parcular aenon to spreader ps, joints, blades, hoses and coupling parts.
• Every three years, or whenever a doubt is raised about the safety or reliability
of the appliance, a funcon and load test must also be carried out (per DGUV
guideline 305-002 or country-specic regulaons).
• Aer every load, check the lubricaon of the movable parts and pins, and spray
with suitable grease if necessary.
• Every 10 years we recommend a complete change of the hydraulic oil by our factory
service to maintain full performance.