Weber Rescue Systems E-FORCE3 - Safety; Intended Use

2 Safety
This secon of the operang instrucons provides a comprehensive overview of all important
safety aspects to protect the operang personnel, as well as for
safe, trouble-free operaon.
Non-observance of the handling and safety instrucons presented in these Operang
Instrucons can result in serious dangers.
2.1 Intended use
The hydraulic baery tools are designed and tested exclusively for the intended applicaons
described here. All other acvies are fundamentally prohibited.
All baery tools are designed as one-man appliances and are therefore to be operated by only
one person.

•
The baery-powered cung appliances are used exclusively for cung doors and
roof beams, pillars and door sills, the ring and the spokes of the steering wheel.
• If possible, for cung solid material, always use the rear part of the cuer unit
as it is equipped with special edges for cung round material.
• In industrial applicaon, the appliances can also be used to cut pipes, structural
steels, proles, sheets and cables.
Spr
eader
• The baery-powered spreading appliances can be used for opening doors, liing
vehicles or other moveable loads, pushing away and moving vehicle parts and loads,
and squeezing pipes and e bars.
• If possible, always use the ps of the spreader for squeezing.
• The spreader ps can also be used as a peeling tool.
• The chain set is solely to be used for pulling.
RSX 160 E-FORCE3, RSC 170 E-FORCE3, RSC 170 PLUS E-FORCE3, RSU 180 PLUS E-FORCE3,
RSX 185 E-FORCE3, RSC 190 E-FORCE3, RSC 190 PLUS E-FORCE3, RSC 200 E-FORCE3, RSU
210 PLUS E-FORCE3, RSC F7 E-FORCE3
SP 40 C E-FORCE3, SP 44 AS E-FORCE3, SP 54 AS E-FORCE3,
SP 50 BS E-FORCE3